 |
|||
|
|
|||
|
Page Title:
PARKING BRAKE SWITCH DOES NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead to
wire 75 where wire 75 connects to
parking brake switch.
(3) Connect multimeter negative lead to
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-42).
(5) Turn engine start switch to ON position,
BUT DO NOT START ENGINE,
(TM 10-3930-673-10).
(6) Turn parking brake switch to ON
position.
(a) If 24 vdc is present, go to Step 5 of
this fault.
(b) If 24 vdc is not present, replace
parking brake switch (Para 8-7).
(7) Turn parking brake switch to OFF
position.
(8) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(9) Disconnect negative battery cable from
negative side of battery (Para 8-42).
(10) Install console access panel and
screws.
2-605
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals