 |
|||
|
|
|||
|
Page Title:
PARKING BRAKE SWITCH DOES NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
CIRCUIT BREAKER CB1
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead to
wire 10 where wire 10 connects to
WIRE 3
circuit breaker CB1.
(3) Connect multimeter negative lead to
WIRE 10
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-42).
(5) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 3 of
this fault.
(b) If 24 vdc is not present, replace
circuit breaker CB1 (Para 8-11).
(6) Turn engine start switch to OFF
ENGINE START
position (TM 10-3930-673-10).
(7) Disconnect negative battery cable from
SWITCH
negative side of battery (Para 8-42).
(8) Install access panel and four screws.
2-601
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals