|
|
TM 10-3930-673-20-1
ACCESS
P
ANEL
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Disconnect connector J2 from
connector P2.
(3) Connect multimeter positive lead (+) to
wire 9 at circuit breaker CB6.
SCREW
(4) Connect multimeter negative lead () to
connector J2-1 (4).
(a) If continuity is present, go to
Step 18 of this fault
(b) If continuity is not present, repair
wire 9 or connector J2 (Para 8-48).
(5) Install access panel and four screws.
(6) Connect connector J2 to connector P2.
(7) Connect negative battery cable to
negative side of battery (Para 8-42).
WIRE 9
(8) Install battery cover (Para 8-42).
CIRCUIT BREAKER CB6
J2-1
CONNECTOR J2
CONNECTOR
J
2
CONNECTOR P2
TR01653
2-369
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |