 |
|||
|
|
|||
|
Page Title:
BLACKOUT STOPLIGHTS DO NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
VOLTAGE TEST
(1) Set multimeter to volts dc.
J1-7
(2) Disconnect connector J1 from
connector P1.
(3) Connect multimeter positive lead (+) to
connector J1-7 (wire 44).
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
CONNECTOR J1
(TM 10-3930-673-10).
(7) Turn blackout light switch to B. O.
DRIVE position (TM 10-3930-673-10).
(8) Depress brake pedal
(TM 10-3930-673-10).
CONNECTOR P1
(a) If 24 vdc is present, go to Step 16
of this fault.
(b) If 24 vdc is not present, go to
Step 15 of this fault.
(9) Turn blackout light switch to OFF
position (TM 10-3930-673-10).
(10) Turn engine start switch to OFF
position, (TM 10-3930-673-10).
(11) Disconnect negative battery cable from
negative side of battery (Para 8-42).
(12) Connect connector J1 to connector P1.
TR01649
2-361
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals