 |
|||
|
|
|||
|
Page Title:
BLACKOUT DRIVE LIGHT(S) DO NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Disconnect connector J1 from
connector P1.
J1-3
(3) Connect multimeter positive lead (+) to
connector J1-3 (wire 47).
(4) Connect multimeter negative lead () to
known good ground.
CONNECTOR J1
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
CONNECTOR P1
(TM 10-3930-673-10).
(7) Turn blackout light switch to B. O.
DRIVE position (TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 13
of this fault.
(b) If 24 vdc is not present, go to
Step 12 of this fault.
(8) Turn blackout light switch to OFF
position (TM 10-3930-673-10).
(9) Turn engine start switch to OFF
position, (TM 10-3930-673-10).
(10) Disconnect negative battery cable from
negative side of battery (Para 8-42).
TR01669
2-335
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals