|
|
TM 10-3930-673-20-1
REAR
FLOODLIGHT
SWITCH
INSTRUMENT
PANEL
SCREW
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Remove four screws from instrument
panel.
(3) Lift instrument panel out to get to rear
floodlight switch where wire 70
connects.
(4) Connect multimeter positive lead (+) to
rear floodlight switch where wire 70
connects.
(5) Connect multimeter negative lead () to
known good ground.
(6) Connect negative battery cable to
negative side of battery (Para 8-42).
(7) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 15
of this fault.
ENGINE
(b) If 24 vdc is not present, repair
wire 70 (Para 8-48).
START
(8) Turn engine start switch to OFF
SWITCH
position (TM 10-3930-673-10).
(9) Disconnect negative battery cable from
negative side of battery (Para 8-42).
WIRE 70
REAR
FLOODLIGHT
SWITCH
TR01574
2-301
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |