|
|
TM 10-3930-673-20-1
C
LIGHT
CONTINUITY TEST
ONNECTION
(1) Remove bulb from faulty floodlight.
(2) Set multimeter to ohms.
(3) Connect multimeter positive lead (+) to
ground of light connection.
(4) Connect multimeter negative lead () to
known good ground.
(a) If continuity is present, go to Step 3
of this fault.
(b) If continuity is not present, repair
light connection and/or light ground
GROUND
wire.
2-245
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |