 |
|||
|
|
|||
|
Page Title:
RIGHT TURN SIGNAL DOES NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
turn signal switch male blade connector
where wire 28 connects.
(3) Connect multimeter negative lead () to
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-42).
(5) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(6) Turn ON right turn signal
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 5 of
this fault.
(b) If 24 vdc is not present, replace
turn signal switch (Para 8-12).
(7) Turn OFF right turn signal
(TM 10-3930-673-10).
WIRE 28
(8) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(9) Disconnect negative battery cable from
negative side of battery (Para 8-42).
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
turn signal socket center conductor.
(3) Connect multimeter negative lead () to
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-42).
(5) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
S
REAR TURN
S FRONT TURN
(TM 10-3930-673-10).
IGNAL SOCKET
IGNAL SOCKET
(6) Turn ON right turn signal
(TM 10-3930-673-10).
(a) If 24 vdc is present, replace bulb
(Para 8-33).
(b) If 24 vdc is not present, go to
C
CENTER
C
CENTER
Step 7 of this fault.
(7) Turn OFF right turn signal
ONDUCTOR
ONDUCTOR
(TM 10-3930-673-10).
TR01715
(8) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(9) Disconnect negative battery cable from
negative side of battery (Para 8-42).
2-225
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals