Table 2-8. Operator Preventive Maintenance Checks and Services-continued -788620054

TM 10-3930-673-10

Table 2-8. Operator Preventive Maintenance Checks and Services - CONT.

Location

Item to Check/

Not Fully Mission

Item

Service

Procedure

Capable if:

No.

Interval

CAUTION

New vehicle (break-in) maintenance is

required on the ATLAS at 20 hours and

50 hours. Refer to Para 2-6 and contact

Unit Maintenance to avoid early wear or

damage to the forklift and possible void-

ance of the warranty.

Before/After

Exterior or Forklift

a. Check for oil, fuel, coolant and hydraulic

Class III leaks are evident.

oil leaks.

Before/After

b. Check Cab/Roll Over Protective Structure Obvious damage, cracks,

(ROPS)/Falling Object Protective Structure bends in weldments.

(FOPS) and vehicle frame for obvious

damage, cracks, bends and evidence of

loose mounting hardware.

Before/After

c. Inspect boom, attachment, carriage, and

Boom, attachment, carriage,

forks for cracked, bent or broken members. or forks are bent, cracked,

broken or missing.

Wiring is frayed, broken or

Before/After

d. Check exterior wiring and connectors for

secure mounting, frayed, broken or burned burned.

wires.

Before/After

e. Check frame tilt stops for cracks, bends or

Any obvious damage,

weld and other damage.

cracks or bends in

weldment.

f. Check that boom hoses and electrical cable Hoses or cables are crossed

Before/After

are snug against hose guide and not

or obviously loose.

crossed.

Before/After

Tires, Wheels, and

a. Check tires for damage (i.e., cuts, gouges, One or more tires

Flexible Brake Lines

foreign matter), low tire pressure (refer to unserviceable.

TM 9-2610-200-24). Maintain tire pressure

at 65 psi.

Before/After

b. Check wheels for damage and loose or

Cracks, loose or missing

missing mounting nuts.

mounting nuts.

Before/After

c. Check flexible brake lines for signs of

Any signs of wear, cuts or

wear, cuts or damage.

damage.

2-20