| |
TM 10-3930-671-24
b.
Installation.
(1)
To install air cleaner assembly (1), proceed as follows:
(a)
Apply sealing compound to plug (30).
(b)
Install plug (30) on intake tube (18). Tighten 135-145 lb-in (15-16 N•m).
(c)
Apply sealing compound to both ends of fitting (29).
(d)
Install air restriction indicator (28) on intake tube (18) with fitting (29).
(e)
Position air cleaner elbow (26) on engine air intake adaptor (27).
(f)
Install intake tube (18) and two clamps (25) on air cleaner elbow (26).
(g)
Install bracket (22) with two screws (24) and nuts (23). Tighten 177-221 lb-in (20-25 N•m).
(h)
Install clamp (21) on intake tube (18) and bracket (22) with screw (20) and nut (19). Tighten 71-88 lb-in (8-10
N•m).
(i)
Install hose (17) on intake tube (18) with clamp (16).
(j)
Install air duct (6) on hose (17) with clamp (16).
NOTE
If clamps were removed during removal, perform Step (k). If clamps were not removed, proceed to
Step (I).
(k)
Install two clamps (15) on air cleaner assembly (1).
(I)
Install air cleaner assembly (1) and bracket (8) on cover plate (9) with four screws (14), washers (13), and
nuts (12). Tighten 177-221 lb-in (20-25 N•m).
(m) Install bracket (11) on cover plate (9) with two nuts (10). Tighten 168-216 lb-in (19-23 N•m).
(n)
Install cover plate (9), bracket (8), and air cleaner assembly (1) with four screws (7). Tighten 30-35 Ib-ft (40-
50 N•m).
(o)
Install bracket and clamp with two nuts on muffler [Para 3-19b, Step (3)].
(p)
Install intake hose (5) on air cleaner assembly (1) and air duct (6) with two clamps (4).
(q)
Connect two wires (2) and (3).
(2)
Connect batteries (Para 3-25).
END OF TASK
3-41
|