| |
TM 10-3930-671-24
Reassembly
Refer
to
Disassembly
instructions
for
important
information on reassembly.
1.
Assemble valve in reverse order of disassembly.
2.
Coat all parts with clean hydraulic oil to facilitate
assembly
and
provide
initial
lubrication.
Petroleum jelly can be used to hold seal rings in
place during assembly.
3.
Use new O-rings and seals for all parts.
4.
Install seal rings and the seal ring retainer in the
grooves in body of each inlet and center section.
Use petroleum jelly to hold the seals in place.
Carefully place the sections together in the same
order in which they were removed.
Hydraulic Valve Relief Pressure Settings
After overhaul of the main hydraulic valve, the hydraulic
system relief pressure and auxiliary valve relief pressure
settings must be checked and reset after reassembly of
the valve and installation in the truck.
Refer to Section 10.2, Hydraulic System Relief Pressure
Check & Adjustment.
F-470
|
