TM 10-3930-671-24 3. Remove  the  valve  spools  by  tapping  lightly  on the valve).  top end with a soft-faced hammer to drive them out of the valve body. 4. Arrange the parts in the sequence of removal. 5. Next,   remove   the   hydrostat   (secondary   stage relief First, remove the plug. Torque specification:  25 Ib-ft (34 N•m). 6.    Then,   remove   the   O-ring,   the   poppet   valve spring and the relief valve poppet. 7.    Remove the tilt flow control cartridge(s). NOTE The flow control cartridges have left-hand threads. Torque specification:  25 Ib-ft (34 N•m). F-467