TM 10-3930-671-24 Steer Axle Mounting Parts See Section 9.0 for Power Steering Lines. Refer to Section 9.5 for (Type 2) steer axle mounting. NOTE Refer   to   the   appropriate   Customer Service   Parts   Book   for   the   correct service replacement parts to be used during reassembly and installation of steer axle. Shim Installation Procedure 1. Install  shims  between  ends  of  silent  blocks  and frame socket, as needed to eliminate free play. 2. Before  assembly  of  axle  in  frame,  install  front shim.  Remove is axle cannot be installed.  Add rear  shim  if  remaining  axle  free  play  clearance permits. 3. Pean the bottom edge or corners of the shims to bend  them  over  the  frame  to  lock  the  shims  in place. Steer Axle Mounting 26.100 Steer Axle Assembly 26.168 Bushing, Steer Axle Pivot 26.171 Silent Block, Steer Axle Mounting Front 26.174 Silent Block, Steer Axle Mounting Rear 26.175 Fastener, Steer Axle Silent Block 26.332 Shim, Steer Axle Silent Block 26.341 Spacer, Steer Axle Pivot Bushing 93.679 Nut, Steer Axle Silent Block Fastener F-426