| |
TM 10-3930-671-24
Table 3-1. Unit Preventive Maintenance Checks and Services - CONT.
Mo-Months
Hr-Hours
Item
Interval
Item to be Inspected
No.
Mo
Hr
Procedure
WARNING
Do not change fuel filter when engine is hot; fuel can
be ignited by a hot engine.
22
6
1000
Fuel Filter
Change fuel filter (Para 3-16, Fuel System Service).
Bleed fuel system if required (Appendix F, Diesel Fuel
System, Section 5.3).
23
12
2000
Air Cleaner
Replace air cleaner element (Appendix F, Air Filter,
Section 4.9).
24
12
2000
Radiator Cap
Inspect radiator cap. Pressure test radiator cap and
cooling system while checking for leaks (Appendix F,
Planned Maintenance Procedures, Section 3.2, and
Cooling System, Section 4.8).
25
12
2000
Cooling System
Drain/flush cooling system (Appendix F, Planned
Maintenance Procedures, Section 3.2, and Cooling
System, Section 4.8). System capacity is 9 qt (8.5 I).
26
12
2000
Brakes
Check service brake adjustment (Appendix F,
Planned Maintenance Procedures, Section 3.2). Check
brake pedal adjustment (Appendix F, Brake System,
Section 8.4).
27
12
2000
Hydraulic Tank
Drain and fill hydraulic tank (Appendix F, Planned
Maintenance Procedures, Section 3.2, and Hydraulic
Sump Fluid and Filter Change, Section 10.1). Change
hydraulic tank filter, (Appendix F, Hydraulic Sump Fluid
and Filter Change, Section 10.1).
28
12
2000
Service Brake
Check service brake adjustment and wear (Appendix F,
Planned Maintenance Procedures, Section 3.2). Check
brake pedal adjustment ( Appendix F, Brake System,
Section 8.4).
29
12
2000
Steer Axle and Lines
Lubricate/adjust steer wheel bearings (Appendix E,
Lubrication Order). Check power steering relief
pressure (Appendix F, Power Steering System Relief
Pressure Setting, Section 9.1).
3-11
|