| |
TM -10-3930-671-24
Transaxle Overhaul
TA 18 1-speed Transaxle
1.
Disassembly
1.
Before attempting any or overhaul of this assembly, please read through the entire disassembly and assembly
procedures first.
NOTICE-Cleanliness is of extreme importance in the repair and overhaul of this assembly.
2.
The exterior surface of the unit MUST be thoroughly cleaned of all dirt and foreign substances to prevent
contamination of the parts during disassembly and overhaul. Perform all disassembly and assembly work in a
clean area. Protect all components from dust and dirt while repairs are being made.
3.
Keep all parts in order as disassembly progresses. Take care to properly identify each parts and its order of
removal. If necessary, keep notes and put markings on parts using a non-destructive marker such as felt-tipped
pen.
A. Remove Auxiliary Subassemblies
1.
Remove torque converter assembly by carefully
sliding it off the turbine (clutch) shaft and stator
support.
2.
Disassembly converter drive plate and adapter,
ass need.
Remove the :
3.
Oil filter.
4.
Charging pump.
5.
Oil supply line assembly.
6.
Transmission control valve assembly.
F-359
|
