TM 10-3930-671-24 21. Install  the  parking  brake  linkage.  Install  parking brake   lever   and   cable   assembly   on   steering column mounting.  Install  steering  column  lower mounting bracket. Refer    to    Section    8.    1,    Service    Brake    and    Inching Systems. 22. Install the drive wheels.  Tighten the wheel lug nuts to torque spec: 470-530 Ib-ft (637-718 N•m) 23.    Inspect   to   make   sure   all   parts   have   been reassembled and installed correctly. 24.    Raise truck, remove blocking and carefully lower truck to the floor. Remove lifting equipment. 25.    Install  frame  side  compartment  doors.    Tighten fasteners  to  torque  spec:  30-35  Ib-ft  (40-50  N- m). 26.    Install  the  upright.  Refer  to  Section  13.1,  Up- right. 27.    Install the counterweight. Refer    to    Section    12.1,    Counterweight    Maintenance, Removal and Installation. 28.    Reconnect  battery  ground  cable  to  the  engine ground connection. 29.    install floor boards and close engine compartment. F-340