TM 10-3930-671-24 27. Remove   the   converter   housing   to   engine   real mounting plate or flywheel housing fasteners. NOTE Check   and   be   sure   all   connecting parts, as necessary, have been detached     from     the     transaxle     and moved  out  of  the  way  and  that  the supporting equipment is in a position that will  safely  lower  and  remove  the transaxle   assembly   from   under   the truck chassis. 28. Remove    transaxle    mounting    bracket-to-frame fasteners. Heavy components can fall and cause severe   injury.      Keep   your   feet   and body clear at all times. 29. Carefully   separate   the   converter   housing   and transaxle  assembly  from  the  engine.    It  may  be necessary    to    use    prybars    to    disengage    the assemblies.    If  the  assemblies  refuse  to  part, check   to   make   sure   all   fasteners   have   been removed. NOTE The converter stays with the transmission. 30. Carefully move and lower the transaxle away   from   the   engine.      Be   sure   all fasteners,  wiring,  connecting  lines,  etc., have been removed and/or moved out of the   way.      Check   to   be   sure   engine support blocking is secure. 31. Carefully remove transaxle assembly from frame.    Be  sure  frame  blocking  is  not  disturbed by movement of the transaxle during removal. 32. Lower  the  assembly  to  the  floor  and  move  the lifting  equipment  away.    If  a  floor  jack  is  being used,  be  sure  to  put  stable  blocking  under  the transaxle assembly to allow removal of the jack. F-336