TM 10-3930-671-24 b. Installation. (1) Cut and trim three pieces of insulation (1) and four pieces of insulation (4) as noted during removal. WARNING Adhesive  causes  immediate  bonding  on  contact  with  eyes,  skin,  or  clothing  and  also  gives  off harmful vapors.  Wear protective goggles and use in well-ventilated area.  If adhesive gets in eyes, try to keep eyes open; flush eyes with water for 15 minutes and get immediate medical attention. (2) Apply adhesive to top hood (3). (3) Position four pieces of insulation (4) on top hood (3) as shown. (4) Close top hood (3) (TM 10-3930-671-10). (5) Apply adhesive to overhead guard (2). (6) Position three pieces of insulation (1) on overhead guard (2) as shown. END OF TASK 3-113 (3-114 blank)