TM 10-3930-671-24 NOTE Left and right step plates are installed the same way.  Right step plate is shown. (13) Install step plate (13) on forklift (5) with two screws (15) and nuts (14).  Tighten nuts 180-220 lb-in (20-25 N•m). NOTE Left- and right-side plates are installed the same way.  Right-side plate is shown. (14) Install right-side plate (10) on forklift (5) with four clips (12) and screws (11).  Tighten screws 30-37 Ib-ft (40-50 N•m). (15) To install floor plates (6 and 7), proceed as follows: (a) Install rear floor plate (7) on forklift (5) with two clips (9) and screws (8).  Tighten nuts 180-220 lb-in (20-25 N•m). (b) Install front floor plate (6) on forklift (5) with four clips (9) and screws (8).  Tighten nuts 180-220 lb-in (20-25 N•m). 3-107