TM 10-3930-671-24 (11) To remove cover (68), remove four screws (69) and cover (68) from front assembly plate (70). (12) Remove rubber mat (71), two nuts (72), screws (73), and plate (74) from valve mounting bracket (75). (13) To remove front assembly plate (70), proceed as follows: (a) Remove master power switch (77) from front assembly plate (70) (Para 3-22, Step a(1)[g]). (b) Remove two screws (78), screws (79), nuts (80), nuts (81), latch stud (82), two nuts (83), washers (84), and front assembly plate (70) from forklift (5). (c) Remove button plug (85) from front assembly plate (70). (d) Remove two nuts (86), washers (87), and latch stud (88) from front assembly plate (70). NOTE The procedure to remove brackets is the same for both left and right hinge brackets.  Right-side hinge bracket is shown. (14) To remove hinge bracket (89), remove two screws (90), fasteners (91), and hinge bracket (89) from forklift (5). 3-102