TM 10-3930-671-24 (3) To remove floor plates (6 and 7), proceed as follows: NOTE Remove clips only if required. (a) Remove four screws (8) and front floor plate (6) from forklift (5). (b) Remove two screws (8), rear floor plate (7) and four clips (9) from forklift (5). NOTE Left- and right-side plates are removed the same way.  Right-side plate is shown. (4) Remove four screws (11), right-side plate (10), and four clips (12) from forklift (5). NOTE Left and right step plates are removed the same way.  Right step plate is shown. (5) Remove two nuts (14), screws (15), and step plate (13) from forklift (5). (6) Remove left-side and right-side hoods (TM 10-3930-671-10). 3-98