TM 10-3930-671-24 WARNING Corrosion inhibitor contains alkali.  Do not get in eyes; wear goggles/safety glasses when using. Avoid contact with skin.  In case of contact, immediately wash area with soap and water.  If eyes are contacted, flush eyes with large amounts of water for at least 15 minutes  and  get  immediate medical attention. (b) Coat two positive battery terminals (9) with corrosion preventive compound. (c) Install two positive battery terminal clamps (8) on two positive battery terminals (9) with two nuts (7). (d) Position two battery terminal covers (6) on two positive battery terminal clamps (8). (e) Coat two negative battery terminals (5) with corrosion preventive compound. (f) Install two negative battery terminal clamps (4) on two negative battery terminals (5) with two nuts (3). (g)    Install cooling system compensation tank and bracket (2) with two nuts (1). (2) Close top hood (TM 10-3930-671-10). (3) Close left-side hood (TM 10-3930-671-10). (4) Install right-side hood (TM 10-3930-671-10). (5) Remove wheel chocks (TM 10-3930-671-10). END OF TASK 3-73