| |
TM 10-3930-671-24
g.
Horn Replacement.
(1)
Removal.
(a)
Disconnect batteries (Para 3-25).
(b)
Remove floor panels (Para 3-36).
(c)
Disconnect connector (1) from terminal (2) of horn (3).
(d)
Remove nut (4), lockwasher (5), and horn (3) from bracket (6). Discard lockwasher.
(e)
Remove two nuts (7), bracket (6), two washers (8), and screws (9).
(2)
Installation.
(a)
Install bracket (6) with two screws (9), washers (8) and nuts (7). Tighten nuts 70-85 lb-in (8- 10 N•m).
(b)
Install horn (3) on bracket (6) with lockwasher (5) and nut (4).
(c)
Connect connector (1) to terminal (2) of horn (3).
(d)
Install floor panels (Para 3-36).
(e)
Connect batteries (Para 3-25).
END OF TASK
3-65
|
