TM 10-3930-671-24 b. Installation. NOTE Connect all connectors as tagged and marked during Removal. (1) Connect two connectors (26) to two terminals (27). (2) Install regulator (22) on alternator (25) with screw (24) and two screws (23). (3) Folding back terminal cover (17), install wire (20) on terminal (21) with lockwasher (19) and nut (18).  Tighten nut. (4) Install wire (15) on terminal (16) with screw (14). (5) Install wire (12) on terminal (13) with lockwasher (11) and nut (10).  Tighten nut. (6) Install wire (9) on terminal (5) with lockwasher (8) and nut (7).  Tighten nut. (7) Connect connector (6). (8) Folding back terminal cover (1), install harness wire (4) on terminal (5) with lockwasher (3) and nut (2). (9) Install intake tube (Para 3-18b, Step (1)[f] - (1)[i]). (10) Connect batteries (Para 3-25). END OF TASK 3-46