TM 10-3930-671 -10 3-11.  TRANSAXLE LEVEL CHECK AND SERVICE. a. Transaxle Fluid Level Check. (1) Start engine (Para 2-4 [b]). WARNING Engine   and   transaxle   are   very   hot after   running.      Do   not   touch   these parts  with  bare  hands  or  allow  body to  come  in  contact.    Hot  engine  and transaxle    parts    can    cause    serious burns. (2) Operate   vehicle   until   transaxle   temperature   is 180°- 200°F (82°- 930C). NOTE Engine   must   be    running    to    check transaxle fluid level. (3) Stop vehicle (Para 2-5 [d]).  Do not stop engine. (4) Remove transaxle dipstick (1) from fill tube (2). (5) Wipe transaxle fluid from dipstick (1). (6) Insert dipstick (1) in fill tube (2). (7) Remove dipstick (1). (8) Check fluid level.  Transaxle fluid level should be between arrows on dipstick (1). (9) If transaxle fluid level is low, add transaxle fluid (Para.  3-11 [b]). (10) If transaxle fluid is not low, install dipstick (1) in fill tube (2). 3-22