| |
TM 10-3930-671-10
Specifications
Fill Capacities/Fluid Volumes:
Fuel Tank ..................................................
Diesel ..................................................................
8 gal. (30.0 L)
Cooling System .........................................
Continental 2.7 L Diesel.......................................
9 qt. (8.5 L)
Engine Oil, w/Filter .....................................
Continental 2.7 L Diesel.......................................
5.5 qt. (5.2 L)
Transaxle (Transmission & Drive Axle) ......
TA18 ....................................................................
32 pints (15.1 L)
Hydraulic Sump Tank (Usable Volume) .....
20.8 gal. ...............................................................
(5.5 L)
Hydraulic System Relief Pressure Setting:
Lift and Tilt (Adjustable) Model...................
17.20....................................................................
2350 psi. (16200 kPa)
22.35....................................................................
2650 psi. (18270 kPa)
27.30....................................................................
3000 psi. (20685 kPa)
Engine Speed Settings (+) (-) 50 rpm:
Engine ..................................................................... 2.6 L
Transaxle.................................................................TA18
Idle Speed (rpm Max.)............................................... 600
No Load (Governed Speed) ................................... 2300-
2600rpm
*
Idle speed must be adjusted so truck has
adequate oil supply to steer correctly.
•
Idle speed must be adjusted so truck (when
empty) does not have excessive creep
speed.
•
Creep speed should be limited to 2 ft. Per
second.
Electrical System:.......................................... 12 volt DC,
Negative Ground
Alternator ........................................................... 37 amp.
Battery Rating (Cold Crank) ................................. Diesel
Maintenance-Free
12v DC--625 amps
00F
Engine Crankcase Oil:
Gasoline/LPG Engines ................ API CC/SE Mil-Z104B
MIL-45199B
Transmission Fluid:
Power-shift Transmission,
Torque Converter, and Drive Axle .......... AMOCO 1000
(or TEXACO 1893 TDH)
Hydraulic Fluid:
Hydraulic Sump .............................. Clark Specification
Normal Application................................................MS-68
Multi-Purpose Grease:
Axle Ends, Wheel Bearings ............. NLGI Grade No. 1
Steer Axle Linkage/
Tie Rod................................... Lithium soap base grease
Ends, Steer Axle Knuckle ....................................... Clark
Specification
MS-I 07C (or equivalent)
Chain Lube:
Upright Lift Chains ................................... Clark #886399
Chain and Cable Lube
(or equivalent)
Dry-Film Lubricant:
Side Shifter,
Attachments ...........................Dow Corning Milykote 321
Clamp Slides
Bonded Lubricant .....................................Graph-O-Kote
#220, MolubAlloy
#389 Dry Lube
(or equivalent)
Battery:
(Unsealed type) ....................................... Distilled Water
Filters:
Engine Fuel
Engine Oil
Engine Air
Transmission Oil
Hydraulic System Oil
Hydraulic Sump Breather
E-109 (E-110 blank)
|