TM 10-3930-671-10 Know The Truck Truck Components & Features Tilt Cylinders The tilt cylinders are mounted with self-aligning bearings at each end.  The tilt requirement is satisfied with an adjustable rod end and a tilt limit spacer sleeve. Driver’s Seat The driver’s seat is a new safety seat equipped with seat belt.  It has protective wrap-around arms at each side designed to support and hold the operator in the seat if the truck tips. The seat is bolted to the center top of the engine compartment cover, which is locked in place by the control latch.  The seat mounting base allows a 6-inch fore-and-aft adjustment of its slide mechanism. Electrical Components • Electrical Wiring: Two-piece wiring harness. • Starter: Reduction type, positive engagement drive. • Alternator: Delco 37-amp rating. • Ignition Switch: Key switch, keyed alike. • Master Power Switch: Two-position rotary switch. Instruments • Fuel gauge. • Indicator lights with international symbols. 1. Engine coolant over-temperature. 2. Transmission oil over-temperature. 3. Engine oil low-pressure. 4. Battery discharge. • Hourmeter: Solid-state activated by engine oil pressure switch. Uprights • High-Visibility Three-Stage Unit. • Uprights for forklift have separate bolt-on mounting trunnion brackets. E-44