| |
TM 10-3930-669-34
VISUAL INSPECTION
(1)
Open left side rear access cover (TM 10-3930-
669-10).
(2)
Inspect front crankshaft cover for oil leakage.
(a)
If oil leakage is present, replace engine
(Para 3-3).
(b)
If oil leakage is not present, go to Step
(3) below.
(3)
Close left side rear access cover.
(4)
Remove fuel/water separator bracket (TM 10-
3930-669-20).
(5)
Inspect inside of flywheel housing for oil
leakage.
(a)
If oil leakage is present, replace rear oil
seal (Para 3-14).
(b)
If oil leakage is not present, rear oil seal
is OK.
(6)
Install fuel/water separator bracket.
VERIFY REPAIR
Operate engine over the period of time specified in the
lubrication order (LO 10-3930-669-12).
(a)
If engine oil consumption exceeds 10 quarts
per 250 hours of operation and/or blue smoke
is excessive, fault not corrected.
Notify supervisor.
(b)
If engine oil consumption does not exceed 10
quarts per 250 hours of operation and blue
smoke is not excessive, fault corrected.
2-37
|