TM 10-3930-669-34 15-11.  SIDE SHIFT CYLINDER REPLACEMENT/REPAIR (CONT). NOTE One anchor shown, all removed the same way. (15) Remove cotter pin (24), pin (25), and side shift chains (11) from anchors (26). (16) Remove two screws (27) and anchor (26) from side shift assembly (7). b. Disassembly. (1) Remove yoke sheave (28) and spacer (29) from side shift cylinder (20). (2) Remove  four  screws  (30),  two  bearing  covers (31), chain guides (32), bearings (33), and chain guides (32) from yoke sheave (28). (3) Remove  rod  wiper  (34)  and  two  bearings  (35) from yoke sheave (28). (4) Remove    fitting    (36)    from    yoke    sheave    (28). 15-78