| |
TM 10-3930-669-34
15-10. HYDRAULIC RESERVOIR REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c.
Installation
INITIAL SETUP
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic’s: Automotive
Two
(Item 1, Appendix E)
Wrench, Torque (O to 175 lb-ft [0-237 N-m])
Equipment Condition
(Item 5, Appendix E)
Wheels choked (TM 10-3930-669-10)
Wrench, Torque (0-60 N.m)
Hydraulic reservoir drained
(Item 12, Appendix E)
(TM 10-3930-669-10)
Remove shunt (TM 10-3930-669-20)
Materials/Parts
Engine/transmission assembly removed
Cap and Plug Set (Item 5, Appendix B)
(Para 3-3)
Rags, Wiping (Item 19, Appendix E)
Solvent, Dry-cleaning (Item 20, Appendix E)
Tags, Identification (Item 21, Appendix E)
Packing, Preformed (3)
a.
Removal.
NOTE
•
Tag and mark all lines, hoses, and fittings prior to removal.
•
Cap and plug all lines, hoses, and fittings when disconnected.
(1)
Remove two screws (1), cover plate (2), and clamp (3) from frame (4) and hose (5).
15-69
|
