| |
TM 10-3930-669-34
CAUTION
Do not damage rod surface. Cylinder
will leak if rod surface is damaged.
(12) Remove lock nut (16), piston (11), and
head (7) from rod (4). Discard lock
nut.
NOTE
Note
location
and
position
of
packing, expansion ring, wiper, and
seal prior to removal.
(13) Remove bearing strip (17), seal (18),
preformed packing (19), expansion
ring (20), and preformed packing (21)
from piston (11). Discard preformed
packings, expansion ring, and seal.
(14) Remove backup seal (22), preformed
packing (23), rod wiper (24), and rod
packing (25) from head (7). Discard
seal,
wiper,
rod
packing,
and
preformed packing.
15-33
|
