| |
TM 10-3930-669-34
15-2.
HYDRAULIC PUMP REPLACEMENT/REPAIR (CONT).
(13)
Install two bushing seals (26) and backup seals
(25) on four bushings (27 and 28).
(14)
Install two preformed packings (24) on rear
pump body (22).
(15)
Install rear pump body (22) and end cover (21)
on spacer plate (23) with four lock washers (20)
and screws (19). Tighten screws to 34-38 lb-ft
(46-51 N.m).
(16)
Position washer (9) and screw (8) in hydraulic
pump (10).
(17)
Install preformed packing (18) and 45° elbow (6)
in hydraulic pump (10). Tighten nut (17).
15-10
|
