TM 10-3930-669-34 (17) Remove four bushings (43  and  44),  front  driven gear  (45),  and  front  driveshaft  (46)  from  front pump body (33) as a unit. (18) Separate four bushings (43 and 44), front driven gear (45), and front driveshaft (46). c. Cleaning/Inspection. WARNING • Dry-cleaning solvent (P-D-680) is TOXIC and flammable.  Wear protective goggles and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors.  Keep away from heat or flame.  Never smoke when using solvent; the flashpoint for type I dry-cleaning solvent is 100°F (38°C) and for type II is 138°F (50°C).  Failure to do so may result in injury or death to personnel. • If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical  help.    If  solvent  contacts  skin  or  clothes,  flush  with  cold  water.    If  solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. NOTE Inspect all hoses, lines, and fittings for cracks, bends, nicks, dents, stripping threads, and cuts.  Replace all damaged parts. (1) Clean all metal parts with dry-cleaning solvent. (2) Inspect all parts for breaks, cracks, burrs, and sharp edges. 15-7