TM 10-3930-669-34 (18) Install   sealing   edge   of   seal   (1)   under   locking edge  of  seal  to  lock  frame  assembly  (3)  to  cab (2). (19) Apply sealing compound to meeting point of seal (1). (20) Use    wiping    rag    to    remove    excess    sealing compound. NOTE Procedures  for  locking  the  seal  of  the  top  and  right  side  glass  are  shown.    All  other procedures   for   replacing   the   top   and   right   side   glass   are   similar   to   the   door   glass replacement. (21) Install locking strip (17) in seal (16) of right side glass and top glass. (22) Apply sealing compound to meeting points of seals (16). (23) Use wiping rag to remove excess sealing compound. NOTE Follow-on Maintenance: •    Remove wheel chocks (TM 10-3930-669-10) END OF TASK 14-9/(14-10 blank)