TM 10-3930-669-34 WARNING Applying excessive or uneven pressure to cab glass may cause it to crack  or  break  resulting  in  injury  to personnel and damage to equipment. (4) Repeat  Steps  (2)  and  (3)  around  entire  frame assembly (3). (5) Remove  frame  assembly  (3)  and  seal  (1)  from cab (2). (6) Place frame assembly (3) on clean work surface. NOTE Frame disassembly procedure for the door is shown.  Procedure to disassemble right side glass frame is similar. (7) Remove four screws (4) from frame assembly (3) and frame track (5). (8) Remove two screws (6) and bracket (7) from frame assembly (3). (9) Remove sealing compound from frame assembly (3)joint. 14-3