| |
TM 10-3930-669-34
14-2.
CAB GLASS REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c.
Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic’s: Automotive
Solvent, Dry-cleaning (Item 20 Appendix B)
(Item 1, Appendix E)
Tags, Identification (Item 21, Appendix B)
Tool Kit, Glass Cutting: Vehicle
(Item 9, Appendix E)
Equipment Condition
Engine OFF (TM 10-3930-669-10)
Materials/Parts
Parking brake applied (TM 10-3930-669-10)
Compound, Sealing (Item 24, Appendix B)
Wheels chocked (TM 10-3930-669-10)
Rags, Wiping (Item 19, Appendix B)
a.
Removal
NOTE
•
Door glass replacement procedure is shown. Procedures for replacement of front
glass, left side glass, and rear glass are similar.
•
Moistening rubber seal contact points will allow rubber to move easier.
(1)
Remove sealing compound from ends of seal (1).
(2)
Move locking edge of seal (1) towards cab (2) to release sealing edge.
(3)
Move sealing edge of seal (1) away from frame assembly (3).
14-2
|
