TM 10-3930-669-34 c. Assembly. NOTE Perform Step (1) only if locator dowel pin was removed. (1) Install  locator  dowel  pin  (12)  in  steer  axle (13)   so   locator   dowel   pin   is   0.087   in. (0.022  N•m)  below  outer  surface  of  steer axle. NOTE • Left-hand  and  right-hand  gland preformed  packings  and  seals are    installed    the    same    way. Left-hand gland is shown. • Ensure that preformed packings, seals, and wipers are installed in correct direction. • Coat  internal  components  with hydraulic oil before assembly. (2) Install  seal  (9),  wiper  (10),  and  preformed packing (11) in left-hand gland (1). 12-13