TM 10-3930-669-34 (4) Remove  four  thru-fasteners  (4)  from  left- hand gland (1) and right-hand gland (5). NOTE Some   hydraulic   oil   may   be   left   in cylinder  barrel  when  removing  gland and piston rod. (5) Using   a   soft-faced   mallet,   remove   right- hand gland (5) from cylinder barrel (2) and piston rod (6). (6) Remove piston rod (6) from cylinder barrel (2). (7) Using a soft-faced mallet, remove cylinder barrel (2) from left-hand gland (1). (8) Remove    left-hand    gland    (1)    from    soft- jawed vise. (9) Remove  seal  (7)  and  expander  (8)  from piston rod (6).  Discard seal and expander. NOTE • Left-hand  and  right-hand  gland preformed  packings  and  seals are    installed    the    same    way. Left-hand gland is shown. • Note     position     of     preformed packings    and    seal    prior    to removal. (10) Remove seal (9), wiper (10), and preformed    packing    (11)    from    left-hand gland    (1).        Discard    seal,    wiper,    and preformed packing. 12-11