TM 10-3930-669-34 12-3. STEERING CYLINDER REPLACEMENT (CONT). NOTE • Steering   cylinder   must   be   removed from right side of steer axle. • Ensure steering cylinder clears locator pin before removal. (4) Remove   four   screws   (12)   and   steering cylinder (10) from steer axle (13). NOTE Note  position  of  locator  pin  prior  to removal. (5) Using    a    1/4    inch    X    20    screw    as    a jackscrew,  install  on  steer  axle  (13)  and remove    locator    pin    (14)    from    steering cylinder (10). (6) Remove   two   cotter   pins   (15),   washers (16),  pins  (17),  and  left  and  right  tie  rod arms (4 and 5) from steering cylinder (10). Discard cotter pins. 12-6