TM 10-3930-669-34 (13) Install  brake  lever  (4)  and  flange  (7)  with four screws (5).  Tighten screws to 18 lb-ft (25 N•m). (14) Coat seal (6) with lubricating oil. (15) Install  seal  (6)  and  spacer  (3)  on  brake lever (4). (16) Install  spacer  (2)  and  screw  (1)  on  brake lever (4).  Tighten to 18 lb-ft (25 N•m). NOTE Follow-on Maintenance: • Install axle housing (Para 10-3). • Install planetary hub (Para 9-2). • Install drive axle (Para 10-2). • Bleed service brakes (TM 10-3930-669-20). END OF TASK 11-9/(11-10 blank)