TM 10-3930-669-34 11-2. BRAKE REPAIR. This task covers: a. Removal b. Cleaning/Inspection c.. Assembly INITIAL SETUP Tools and Special Tools Materials/Parts - Continued Tool Kit, General Mechanic’s: Automotive Solvent, Dry-cleaning (Item 20, Appendix B) (Item 1, Appendix E) Plug Lifting Device, Minimum Capacity 3000 lbs Seal (1814 kg) Seal Micrometer, Outside, Caliper, Set (Item 5, Appendix E) Equipment Condition Wrench, Torque (0-60 N•m) Drive axle removed (Para 10-2) (Item 12, Appendix E) Planetary hubs removed (Para 9-2) Axle housings removed (Para 10-3) Materials/Parts Compound, Sealing (Item 24, Appendix B) Oil, Lubricating (Item 15, Appendix B) Rags, Wiping (Item 19, Appendix B) a. Disassembly. WARNING Differential   weighs   183   lbs   (83   kg). Attach  suitable  lifting  device  prior  to removal    or    installation    to    prevent possible injury to personnel. NOTE • The    left    and    right    brakes    are disassembled the same way.  Left brake is shown. • Note  position  of  levers  prior  to removal. (1) Remove screw (1), spacer (2), and spacer (3) from brake lever (4). (2) Remove  four  screws  (5),  seal  (6),  flange (7),  and  brake  lever  (4)  from  intermediate cover (8).  Discard seal. 11-2