| |
TM 10-3930-669-34
10-5.
STEER AXLE ASSEMBLY REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c.
Assembly
INITIAL SETUP
Tools and Special Tools
Materials /Parts
Tool Kit, General Mechanic’s: Automotive
Cap and Plug Set (Item 5, Appendix B)
(Item 1, Appendix E)
Solvent, Dry-cleaning (Item 20, Appendix B)
Jack (Item 17, Appendix E)
Tags, Identification (Item 21, Appendix B)
Lifting Device, Minimum Capacity 3000 lbs
Bushing (2)
(1814 kg)
Press, 60 Ton (Item 5, Appendix E)
Equipment Condition
Puller (Item 5, Appendix E)
Engine OFF (TM 10-3930-669-10)
Wrench, Torque (0 to 600 lb-ft [0-814 N•m])
Parking brake applied (TM 10-3930-669-10)
(Item 5, Appendix E)
Wheels chocked (TM 10-3930-669-10)
Batteries disconnected (TM 10-3930-669-20)
Wheels removed (TM 10-3930-669-20)
a. Removal
NOTE
•
Tag and mark hoses and fittings prior to removal.
•
Cap and plug hoses and fittings during removal.
•
Left side and right side hoses are removed the same way. Left side shown.
(1)
Disconnect hose (1) from fitting (2).
10-31
|
