| |
TM 10-3930-669-34
(19)
Position spacer (34) and bearing (30) on
bearing (35) and flange (25).
(20)
Using
a
depth
gauge,
measure
the
distance from the outside edge of bearing
(35) to the outside edge of bearing (30).
Record this measurement as Distance B.
(21)
Subtract Distance B from Distance A to
determine the shim thickness required.
Record this difference as Distance C.
(22)
Using a micrometer to measure each shim
(33),
add
shims
together
until
the
combined thickness equals Distance C ±
.004-.005 in. (±0.10-0.12 mm).
NOTE
Use pinion shaft spacer to direct
force of press on inner race of
bearing during installation.
(23)
Using press, gear puller, and spacer (34),
install bearing (35) on pinion shaft (24).
10-23
|
