| |
TM 10-3930-669-34
10-2.
DRIVE AXLE REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c.
Installation
INITIAL SETUP
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic’s: Automotive
Two
(Item 1, Appendix E)
Jack, (Item 17, Appendix E)
Equipment Condition
Lifting Device, Minimum Capacity 3000 lbs
Engine OFF (TM 10-3930-669-10)
(1814 kg)
Wheels chocked (TM 10-3930-669-10)
Wrench Set, Socket, 3/4 in.
Mast assembly pivoted 90 degrees
(Item 5, Appendix E)
(TM 10-3930-669-10)
Wrench, Torque (0 to 175 lb-ft [0-237 N•m])
Mast assembly fully side-shifted
(Item 5, Appendix E)
(TM 10-3930-669-10)
Wrench, Torque (0 to 600 lb-ft [0-814 N•m])
Batteries disconnected (TM 10-3930-669-20)
(Item 5, Appendix E)
Parking brake assembly removed
(TM- 10-3930-669-20)
Materials/Parts
Front wheels removed (TM 10-3930-669-20)
Cap and Plug Set (Item 5, Appendix B)
Planetary hub drained (TM 10-3930-669-20)
Compound, Sealing (Item 23, Appendix B)
Drive axle housing drained
Solvent, Dry-cleaning (Item 20, Appendix B)
(TM 10-3930-669-20)
Tags, Identification (Item 21, Appendix B)
Differential housing drained
(TM 10-3930-669-20)
a.
Removal
(1)
Remove four screws (1), washers (2), and plate (3) from axle (4).
10-2
|
