TM 10-3930-669-34 (13) Using puller and base plate, as required, remove inner  bearing  (17),  spacer  (18),  and  seal  (19) from axle housing (8).     Discard seal. (14) Remove four dowels (20) from axle housing (8). b. Disassembly. WARNING Use  care  when  removing  or  installing  snap  and  retaining  rings.    Snap  and  retaining  rings  are under spring tension and can act as projectiles when released and could cause severe eye injury. (1) Remove retaining ring (21) from planetary gear carrier (2). (2) Using a press, remove three planet  shafts  (22),  seals  (23),  bearings  (24),  spacers  (25),  and  bearings  (24)  from planetary gear carrier (2).  Discard seals. NOTE Note position of spacers prior to removal. (3) Remove three planets (26) and spacers (27) from planetary gear carrier (2). 9-5