TM 10-3930-669-34 c. Installation. (1) Install  screw  (4)  on  rubber  engine  mount  (14) with  nut  (15).      Tighten   screws   to   20   lb-ft   (27 N•m). (2)    Install   rubber   engine   mount   (14)   and   engine ground  strap  (9)  on  frame  (6)  with  two  screws (13),   washers   (12),   and   nuts   (11).      Tighten screws to 69 lb-ft (94 N•m). (3)    Install  right  rear  engine  mount  (5)  and  engine ground strap (9) on engine (10) with washer (8) and screws (7). (4)    Install  right  rear  engine  mount  (5)  on  frame  (6) with   washer   (3),   washer   (2),   and   nut   (1)   on screw (4).  Tighten nut to 20 lb-ft (27 N•m). NOTE Follow-on Maintenance: Install cab (TM 10-3939-669-20). END OF TASK 8-75/(8-76 blank)