TM 10-3930-669-34 (30) Coat  gear  (6)  and  thrust  washer  (5)  with  clean transmission oil. (31) Install  gear  (6)  on  bearing  (7)  and  into  friction clutch plates (14). (32) Install thrust washer (5) on forward shaft (1). (33) Coat bearing (4) with clean transmission oil. NOTE Components  on  forward  shaft,  under bearing,   should   not   be   loose   after bearing is installed. (34) Using   a   press,   install   bearing   (4)   on   forward shaft (1) until it seats firmly against thrust washer (5). 8-63