| |
TM 10-3930-669-34
(18)
Coat
preformed
packing
(21)
with
clean
transmission oil.
(19)
Install preformed packing (21) on clutch piston
(19).
(20)
Coat preformed packing (20), clutch piston (19),
spring retainers (18 and 17), and retaining ring
(16) with clean transmission oil.
(21)
Install preformed packing (20) on forward shaft
(1).
(22)
Install clutch piston (19) in forward shaft (1).
(23)
Install spring retainers (18 and 17) on forward
shaft (1) and clutch piston (19).
Springs of spring retainer (18) should fit in spring
bores of clutch piston (19).
WARNING
Use care when removing or installing
snap and retaining rings. Snap and
retaining
rings
are
under
spring
tension and can act as projectiles
when
released
and
could
cause
severe eye injury.
(24)
Install retaining ring (16) on forward shaft (1).
8-61
|
