TM 10-3930-669-34 (30) Coat  gear  (6)  and  thrust  washer  (5)  with  clean transmission oil. (31) Install  gear  (6)  on  bearings  (7)  and  in  friction clutch plates (12). (32) Install thrust washer (5) on input shaft (1). (33) Coat bearing (4) with clean transmission oil. NOTE Components   on   input   shaft,   under bearing,   should   not   be   loose   after bearing is installed. (34) Using  a  press,  install  bearing  (4)  on  input  shaft (1) until it seats firmly against thrust washer (5). 8-51