TM 10-3930-669-34 (8) Remove   preformed   packing   (19)   from   clutch piston (17).  Discard preformed packing. CAUTION Parts  held  on  input  shaft  by  bearing are  not  a  press  fit.    These  parts  will come     off     shaft     when     bearing     is removed. (9) Using  a  puller,  remove  bearing  (20)  from  input shaft (1). (10) Remove  thrust  washers  (21  and  22)  and  gear (23) from input shaft (1). (11) Remove bearing (24), spacer (25), bearing (26), and thrust washer (27) from input shaft (1). 8-43